- Open Access
SUP: an extension to SLINK to allow a larger number of marker loci to be simulated in pedigrees conditional on trait values
BMC Genetics volume 7, Article number: 40 (2006)
With the recent advances in high-throughput genotyping technologies that allow for large-scale association mapping of human complex traits, promising statistical designs and methods have been emerging. Efficient simulation software are key elements for the evaluation of the properties of new statistical tests. SLINK is a flexible simulation tool that has been widely used to generate the segregation and recombination processes of markers linked to, and possibly associated with, a trait locus, conditional on trait values in arbitrary pedigrees. In practice, its most serious limitation is the small number of loci that can be simulated, since the complexity of the algorithm scales exponentially with this number.
I describe the implementation of a two-step algorithm to be used in conjunction with SLINK to enable the simulation of a large number of marker loci linked to a trait locus and conditional on trait values in families, with the possibility for the loci to be in linkage disequilibrium. SLINK is used in the first step to simulate genotypes at the trait locus conditional on the observed trait values, and also to generate an indicator of the descent path of the simulated alleles. In the second step, marker alleles or haplotypes are generated in the founders, conditional on the trait locus genotypes simulated in the first step. Then the recombination process between the marker loci takes place conditionally on the descent path and on the trait locus genotypes. This two-step implementation is often computationally faster than other software that are designed to generate marker data linked to, and possibly associated with, a trait locus.
Because the proposed method uses SLINK to simulate the segregation process, it benefits from its flexibility: the trait may be qualitative with the possibility of defining different liability classes (which allows for the simulation of gene-environment interactions or even the simulation of multi-locus effects between unlinked susceptibility regions) or it may be quantitative and normally distributed. In particular, this implementation is the only one available that can generate a large number of marker loci conditional on the set of observed quantitative trait values in pedigrees.
In recent literature, algorithms and software were developed to simulate the segregation process of marker loci that are in linkage disequilibrium (LD), some allowing for the possibility for the markers to also be associated with a trait [1–3]. These tools were developed to answer important methodological questions and to help determine empirically the properties of family-based statistical tests, and they should be well received especially now that whole genome association scans have become an affordable reality [4, 5]. There is an increasing body of literature on the benefits of using haplotypes for the mapping of susceptibility genes for complex traits (see  for a review), and guidelines on the choice of sample size and on the power of haplotype association studies are available for samples of unrelated individuals [7, 8]. There is still room for significant advances in haplotype-based mapping methods; flexible and efficient simulation tools are necessary for evaluation of promising statistical methods or designs.
Most recently, the software SimPed  has been introduced to simulate the segregation and recombination processes of marker data in families of arbitrary structures. SimPed allows for the markers, or subsets of markers, to be in LD. The recombination process takes place under a genetic map that is constant between the two sexes. Segregation is performed under the rules of Mendelian inheritance, or, equivalently, under a null genetic model (no linkage and no association with any trait loci). SimPed is designed to evaluate the properties of statistical methods under the null genetic model.
The SIMLA software [1, 2] has recently been extended to account for covariates and interactions in the etiology of the simulated disease or trait. Just like SimPed, the algorithm relies on "gene dropping" to segregate alleles or haplotypes (that may or may not include trait loci) starting from the founders down the lines of a pedigree structure with varying sibship sizes, but that includes at most four founders. Trait values are simulated according to the desired genetic model and pedigrees may be ascertained on conditions set by the user. SIMLA can be used to evaluate the power of statistical methods, under a wide variety of genetic models, for simple and constant pedigree structures.
An advantage of SIMLA over other gene dropping simulation tools (such as SimPed or SimM ) is that it conveniently combines the simulation of markers and trait values in a single tool (whereas, using the other two programs, segregation of a trait locus and flanking markers would have to be followed by the simulation of trait values with the help of an outside tool). This allows for the segregation of the trait locus or loci first, followed by the simulation of trait values. Then, only if the pedigree meets the conditions for ascertainment will the segregation process and the recombination process (under a sex-equal genetic map) of the complete marker data take place, conditional on the descent path of the chromosomes at the trait locus or loci. This strategy represents a gain in efficiency, especially for diseases with low prevalence, for which it is expected that only a small fraction of replicates can be ascertained.
In contrast to these gene dropping simulation tools, SLINK [10, 11] (or, preferably, the faster C version of SLINK, FastSLINK [10–12]) generates marker data in families conditional on the observed trait values and conditional on already observed genotypes, if any, in an iterative fashion, using likelihood methods . The markers and the trait locus may be either in linkage equilibrium (LE) or in LD with each other (the LD option has rarely been used in the literature, see [3, 14–16] for applications). One of the unique features of FastSLINK is that it can generate data conditional on observed quantitative trait values, as long as the trait is normally distributed. One limitation of FastSLINK is that it can only accomodate a handful of markers (including the trait locus): the order of complexity of the algorithm described in Ott  scales exponentially with the number of markers. To help circumvent this restriction, I describe how FastSLINK can be used as part of a two-step algorithm to simulate the segregation process of a large number of marker loci linked to a trait locus and conditional on trait values, with the possibility for any subset of consecutive loci (that may or may not include the trait locus) to be in LD. The general ideas behind what follows were briefly described in  (the main reference for the SIMULATE software), but, to my knowledge, never implemented.
Given a pedigree, a set of observed trait values, and a genetic model that translates genotypes into trait values, the following implementation relies on FastSLINK to simulate the trait locus genotypes conditional on the observed trait values. Since FastSLINK can generate LD between a trait locus and a marker locus, it is possible to obtain in the output the simulated genotypes at the trait locus (which are normally only stored internally) simply by simulating a marker locus that is in perfect LD with the trait locus (with coefficient of determination r2 = 1) and at the same genetic position. At the same time, a perfectly informative marker (all of the founders in the pedigree have different alleles and are heterozygous) is generated at the same genetic position as the trait locus; this marker serves to describe the segregation path of the chromosomes in the pedigree, and is known hereafter as the descent marker. The descent marker allele frequencies are irrelevant, and the marker is generated in LE with the trait locus. In the output of FastSLINK, the alleles of the genotypes are ordered in such a way that the phases of the chromosomes (or haplotypes) are fully known; thus, the descent marker provides complete information about the identity by descent state between any two trait locus alleles in the pedigree.
Then, in a second step, using a second program, genotypes for a large number of marker loci (a number of which may be in LD in an arbitratry number of "blocks" of LD) are simulated for all individuals in the pedigree. First, chromosomes in the founders are generated according to user-specified alleles and haplotype frequencies (when LD is desired) and conditional on the trait locus allele already found on the chromosome (to allow for the possibility of LD between markers and trait loci). Then segregation of the chromosomes at the position of the trait locus follows the path of the descent marker, while recombination occurs on both sides of the trait locus, according to a user-specified genetic map (sex-specific or sex-equal), without interference.
Figure 1 illustrates the two steps of the above algorithm.
Even though there is no serious limit to the size of the pedigrees that FastSLINK can handle, there is a limit on the number of alleles a marker can have: the implementation of FastSLINK uses a bitshift operator to shift a long integer by a number of bits that corresponds to an allele number. Thus, for most computers the total number of alleles a marker may have cannot exceed 32, which restricts the above implementation to pedigrees having at most 16 founders, which is still four times as much as the number of founders SIMLA handles.
The second step of the procedure described above has been implemented in a C++ program named SUP (Slink Utility Program; see Additional Files).
Results and discussion
The performance of the combination of FastSLINK and SUP to simulate genetic data linked to, or linked to and in LD with, a susceptibility locus was compared with that of SIMLA v3.1 and ALLEGRO v1.2c , which are to my knowledge the only two other software that can generate a set of replicates under a non-null genetic model for more than just a few markers (while SIMLINK  simulates marker data conditional on observed trait values, it is restricted by design to no more than two markers). Of these, only SIMLA can simulate LD. Table 1 summarizes the main characteristics of each software. Four pedigree structures were used for simulations, illustrated in Figure 2. The last generation consists of F/2 sib-pairs, where F is the number of founders in the pedigree. All individuals in the last generation were assumed to be affected; the affection status of all other individuals was assumned to be unknown, and thus free to vary.
One susceptibility locus or two interacting ones were simulated for a dichotomous trait. In the case of one susceptibility locus, the high-risk allele frequency was taken to be 15%, and penetrances were chosen under a multiplicative model such that the relative risk for the heterozygote at the trait locus is 1.5 (2.25 for the high-risk homozygous). In the case of two susceptibility loci, a two-locus interaction threshold effect was simulated (see e.g. ): carriers of one or more high risk alleles at either or both trait loci increases the risk by 2.25 as opposed to non-carriers. High-risk alleles were taken to be 15% at each locus. Because the time it takes SIMLA to generate replicates of a disease status highly depends on its prevalence , the prevalence was evaluated at both 5% and 10%.
In all cases, two chromosomes each having 6 or 6000 markers were simulated. If only one susceptibility locus was simulated, then the second chromosome was generated under a null model. When simulating under LE, each marker had four equifrequent alleles. When simulating under LD, only 6 bi-allelic markers were simulated on each chromosome (the default limit of SIMLA) forming the 12 haplotypes found in Table 2 (identical for both chromosomes). When present, the high risk allele, or alleles in case of multi-locus susceptibility, were taken to lie exclusively on the second haplotype shown in Table 2.
While FastSLINK can only generate a single trait locus in a single run, it can be used to simulate multi-locus susceptibility between unlinked loci in multiple runs: in the case of two loci, given a set of two-locus penetrances, the marginal penetrances can be calculated for one of the loci and, given the possible genotypes at that locus, conditional penetrances can be calculated for the second trait locus (see  for details). Then, genotypes at the first locus are simulated in a first run of FastSLINK using the marginal penetrances. These genotypes are then used to define different liability classes, each corresponding to a different set of penetrances (the conditional ones). The second trait locus is then simulated in a second run conditional on the observed traits and on the genotype-defined liability classes. This procedure cannot be acheived with ALLEGRO, as the trait locus genotypes are not available in the output and LD cannot be simulated between the trait locus and a marker locus.
Simulation times are found in Table 3. These are estimated from the average over 25 runs on a Xeon 3.0 Ghz processor running Gentoo Linux. For FastSLINK/SUP and ALLEGRO, no significant time differences were found between the two prevalence values; for these two software, only the times corresponding to the 10% prevalence disease model are shown. It can be seen that ALLEGRO is superior when generating data linked to and in linkage equilibrium with a single trait locus (the only cases it can handle), but is not able to generate data for the largest pedigree. SIMLA is comparable in speed to FastSLINK/SUP when only two affected sibs are present, unless a large number of markers are to be generated. Otherwise FastSLINK/SUP is superior in time. When more individuals are affected (as in 4F), the dependence of SIMLA on the prevalence of the disease is marked. No significant time differences can be seen if the six markers are in LD with each other.
The multi-locus susceptibility scenario takes more than twice the time for FastSLINK/SUP to generate the replicates compared with the single trait locus cases, mostly because FastSLINK is much faster to create, say, 1000 replicates of a single family (in run 1, to simulate the first trait locus) than to create a single replicate of a set of 1000 families (in run 2, to simulate the second trait locus). SIMLA always generates genotypes at two trait loci, even if only one is desired (in which case the user must select a null genetic model for the second trait locus). It is thus not surprising to see similar times for the one or two trait locus scenarios. If the two trait loci lay on the same chromosome, then SIMLA's times would be slightly longer . It is planned to extend SUP to allow for two trait loci to be linked.
To get an idea of the increase in time it takes FastSLINK in its standalone version to simulate an increasing number of marker loci, note that it took 8 seconds for FastSLINK to generate a single replicate of only 3 markers (4 alleles each, in LE, in addition to the trait locus) in family 2F, while this time increased to more than 85 minutes for 4 markers. It was not possible to simulate more loci with FastSLINK due to memory constraints.
SUP's execution time scales linearly with the number of markers that are in LE, and linearly with the number of haplotypes with non-zero frequency. For illustration purposes, it was able to handle 100000 markers in LE and all 2097152 possible haplotypes of 21 SNPs in LD (including a trait locus).
To show the validity of the replicates generated by FastSLINK/SUP, haplotype frequencies were estimated from 1000 replicates of family 2F, generated under the scenario of a single susceptibility locus, in LD with the markers, forming the haplotypes found in Table 2. As above, the high-risk allele is found in a frequency of 15%, the relative risk per high-risk allele is 2.25 and the prevalence is set to 10%. Haplotype frequencies were calculated using Haploview v3.2 , and averaged over 25 runs. From Table 2, it can be seen that haplotypes generated by FastSLINK/SUP in the parental generation are found in similar frequencies as those generated by SIMLA. The same can be said about the haplotype frequencies calculated from the replicates unlinked to the susceptibility locus, which are then similar to the population frequencies in Table 2 (data not shown). This shows that, conditional on trait values, SUP generates correct frequencies. Moreover, SUP generates details about the location and the meioses in which recombination events take place during the simulation. These details were used to confirm that the recombination process follows the genetic map (sex-specific or sex-equal) provided in the input (data not shown).
In summary, FastSLINK is one of the most flexible simulation tool that exists: the complexity of the algorithm described in Ott  is linear with the number of individuals, thus the pedigree may be arbitrarily large, it may contain consanguinity loops (but with considerable increase in computing time ; SUP supports pedigrees with inbreeding loops, but requires Mega2's [24, 25] ability to break and reconnect them), and the trait may be qualitative with the possibility of defining different liability classes (to account, for example, for age-dependent penetrances, or to allow for gene-environment interactions or even, as described above, gene-gene interactions), or it may be quantitative and normally distributed. Sex-linked traits and genotypes can be simulated with FastSLINK, but this is not yet supported by SUP. FastSLINK's most serious handicap is that it can only generate data for only few markers, with considerable increase in computing time as the number of markers increases. Combining FastSLINK with SUP in the way presented here resolves this major restriction. One unique feature of FastSLINK/SUP that cannot, to my knowledge, be achieved with any other software is the possibility of efficiently generating a large number of markers or haplotypes conditional on observed quantitative trait values and in LD with the trait locus. This allows, for example, for efficient evaluation and comparision of the power of haplotype-based tests of association with quantitative traits, in actual samples of pedigrees, or even unrelated individuals (by adding dummy parents to create artificial pedigrees, since FastSLINK only allows simulation in families), as they have been collected and phenotyped.
With SIMLA and SLINK or SLINK-based approaches available, investigators have access to a wide variety of options, including the possibility of simulating linkage disequilibrium with one or more trait loci, to conduct efficient and realistic family-based simulation studies.
Availability and requirements
Bass MP, Martin ER, Hauser ER: Pedigree generation for analysis of genetic linkage and association. Pac Symp Biocomput. 2004, 9: 93-103.
Schmidt M, Hauser ER, Martin ER, Schmidt S: Extension of the SIMLA package for generating pedigrees with complex inheritance patterns: environmental covariates, gene-gene and gene-environment interaction. Stat Appl Genet Mol Bio. 2005, 4: 15-
Leal SM, Yan K, Müller-Myhsok B: SimPed: a simulation program to generate haplotype and genotype data for pedigree structures. Hum Hered. 2005, 60: 119-122. 10.1159/000088914.
Matsuzaki H, Dong S, Loi H, Di X, Liu G, Hubbell E, Law J, Berntsen T, Chadha M, Hui H, Yang G, Kennedy GC, Webster TA, Cawley S, Walsh PS, Jones KW, Fodor SP, Mei R: Genotyping over 100,000 SNPs on a pair of oligonucleotide arrays. Nat Methods. 2004, 1: 109-111. 10.1038/nmeth718.
Thomas DC, Haile RW, Duggan D: Recent developments in genomewide association scans: a workshop summary and review. Am J Hum Genet. 2005, 77: 337-345. 10.1086/432962.
Schaid DJ: Evaluating associations of haplotypes with traits. Genet Epidemiol. 2004, 27: 348-364. 10.1002/gepi.20037.
Schaid DJ: Power and sample size for testing associations of haplotypes with complex traits. Ann Hum Genet. 2005, 70: 116-130. 10.1111/j.1529-8817.2005.00215.x.
De La Vega FM, Gordon D, Su X, Scafe C, Isaac H, Gilbert DA, Spier EG: Power and sample size calculations for genetic case/control studies using gene-centric SNP maps: application to human chromosomes 6, 21, and 22 in three populations. Hum Hered. 2005, 60: 43-60. 10.1159/000087918.
Lemire M, Roslin NM, Laprise C, Hudson TJ, Morgan K: Transmission-ratio distortion and allele sharing in affected sib pairs: a new linkage statistic with reduced bias, with application to chromosome 6q25.3. Am J Hum Genet. 2004, 75: 571-586. 10.1086/424528.
Ott J: Computer-simulation methods in human linkage analysis. Proc Natl Acad Sci USA. 1989, 86: 4175-4178. 10.1073/pnas.86.11.4175.
Weeks DE, Ott J, Lathrop GM: SLINK: a general simulation program for linkage analysis. Am J Hum Genet. 1990, 47: A204-
Cottingham RW, Idury RM, Schaffer AA: Faster sequential genetic linkage computations. Am J Hum Genet. 1993, 53: 252-263.
Terwilliger JD, Ott J: Handbook of Human Genetic Linkage. 1994, Baltimore: Johns Hopkins University Press
Cervino AC, Hill AV: Comparison of tests for association and linkage in incomplete families. Am J Hum Genet. 2000, 67: 120-132. 10.1086/302992.
Gordon D, Heath SC, Liu X, Ott J: A transmission/disequilibrium test that allows for genotyping errors in the analysis of single-nucleotide polymorphism data. Am J Hum Genet. 2001, 69: 371-380. 10.1086/321981.
Hattori E, Liu C, Badner JA, Bonner TI, Christian SL, Maheshwari M, Detera-Wadleigh SD, Gibbs RA, Gershon ES: Polymorphisms at the G72/G30 gene locus, on 13q33, are associated with bipolar disorder in two independent pedigree series. Am J Hum Genet. 2003, 72: 1131-1140. 10.1086/374822.
Terwilliger JD, Speer M, Ott J: Chromosome-based method for rapid computer simulation in human genetic linkage analysis. Genet Epidemiol. 1993, 10: 217-224. 10.1002/gepi.1370100402.
Gudbjartsson DF, Jonasson K, Frigge ML, Kong A: Allegro, a new computer program for multipoint linkage analysis. Nat Genet. 2000, 25: 12-13. 10.1038/75514.
Boehnke M, Ploughman LM: SIMLINK: A Program for Estimating the Power of a Proposed Linkage Study by Computer Simulation. Version 4.12. 1997, [http://csg.sph.umich.edu/boehnke/simlink.php]
Marchini J, Donnelly P, Cardon LR: Genome-wide strategies for detecting multiple loci that influence complex diseases. Nat Genet. 2005, 37: 413-417. 10.1038/ng1537.
Strauch K, Fimmers R, Baur MP, Wienker TF: How to model a complex trait. 2. Analysis with two disease loci. Hum Hered. 2003, 56: 200-211. 10.1159/000076394.
Barrett J, Fry B, Maller J, Daly M: Haploview: analysis and visualization of LD and haplotype maps. Bioinformatics. 2005, 21: 263-265. 10.1093/bioinformatics/bth457.
Vitezica ZG, Mongeau M, Manfredi E, Elsen JM: Selecting loop breakers in general pedigrees. Hum Hered. 2004, 57: 1-9. 10.1159/000077384.
Mukhopadhyay N, Almasy L, Schroeder M, Mulvihill W, Weeks D: Mega2: data-handling for facilitating genetic linkage and association analyses. Bioinformatics. 2005, 15: 2556-2557. 10.1093/bioinformatics/bti364.
Mukhopadhyay N, Almasy L, Schroeder M, Mulvihill W, Weeks D: Mega2 (Version 3.0 R8). 2006, [http://watson.hgen.pitt.edu/register]
The author wishes to thank Nicole Roslin for providing helpful comments on this manuscript and helping document the software and creating the accompanying scripts, as well as two anonymous reviewers.
Electronic supplementary material
About this article
Cite this article
Lemire, M. SUP: an extension to SLINK to allow a larger number of marker loci to be simulated in pedigrees conditional on trait values. BMC Genet 7, 40 (2006). https://doi.org/10.1186/1471-2156-7-40
- Marker Locus
- Susceptibility Locus
- Linkage Equilibrium
- Segregation Process
- Pedigree Structure