- Research article
- Open Access
Genetic dissection and fine mapping of a novel dt gene associated with determinate growth habit in sesame
BMC Genetics volume 19, Article number: 38 (2018)
As an important oil crop, growth habit of sesame (Sesamum indicum L.) is naturally indeterminate, which brings about asynchronous maturity of capsules and causes loss of yield.
The genetic basis of determinate growth habit in sesame was investigated by classical genetic analysis through multiple populations, results revealed that it was controlled by an unique recessive gene. The genotyping by sequencing (GBS) approach was employed for high-throughput SNP identification and genotyping in the F2 population, then a high density bin map was constructed, the map was 1086.403 cM in length, which consisted of 1184 bins (13,679 SNPs), with an average of 0.918 cM between adjacent bins. Based on bin mapping in conjunction with SSR markers analysis in targeted region, the novel sesame determinacy gene was mapped on LG09 in a genome region of 41 kb.
This study dissected genetic basis of determinate growth habit in sesame, constructed a new high-density bin map and mapped a novel determinacy gene. Results of this study demonstrate that we employed an optimized approach to get fine-accuracy, high-resolution and high-efficiency mapping result in sesame. The findings provided important foundation for sesame determinacy gene cloning and were expected to be applied in breeding for cultivars suited to mechanized production.
Sesame (Sesamum indicum L.) is naturally indeterminate, the wild relatives and almost all of the cultivated sesame have indeterminate growth habit . Indeterminate growth habit generates tall plant height but results in lodging during mature period, besides, it also brings about asynchronous maturity of capsules from different parts of the plant, in order to decrease immature seeds, harvesting usually performs until capsules on the upper half part mature, then basal capsules dehiscing and the seeds shattering inevitably arise, which causes loss of yield [2, 3].
The first determinate sesame mutant was discovered and reported by Ashri , in determinate mutants, stem growth is interrupted by the initiation of flowering on the stem apex, finally leads to the stem terminating in a flower cluster, therefore, determinate growth habit in sesame causes synchronized flowering and homogeneous capsule maturation , significantly reduces plant height and improves lodging resistance , while synchronous capsule maturation and lodging resistance were necessary to mechanized harvesting, determinate growth habit is one important prerequisite for developing sesame cultivars suited to modern planting systems combine with mechanized harvesting. Although only a few scientists engaged in determinate sesame study, it had never been ceased since first reported, except for agronomic traits observations [2,3,4], the oil content and fatty acid composition were also compared between determinate and indeterminate sesame , the determinate genotypes were found to be of higher oleic acid content and lower linoleic acid content. As to limited molecular research on determinate sesame, only an ISSR marker has been identified associated in coupling phase linkage with the gene control determinate growth habit in sesame .
Mutations for determinate growth habit with a short period of synchronous, uniform flowering and homogeneous maturity were important in the domestication of many plants , therefore, determinacy as an agronomically important trait has also been discovered and investigated in many other plants, such as soybean , Arabidopsis thaliana , common bean , tomato , maize , faba bean , common bean , chickpea , pigeonpea , cowpea . Furthermore, extensive genetic and molecular studies have been implemented in these plants. Genes for determinacy of common bean, cucumber, soybean, maize and Brassica juncea have been located by QTL mapping [17,18,19,20,21,22], molecular makers associated with determinacy gene of faba bean, pigeonpea, common bean and soybean have been also revealed by linkage analysis or whole-genome scanning based association mapping [12, 13, 15, 23, 24]. Besides, candidate gene or homologous sequences analysis or ortholog gene sequencing approach has also been employed on common bean, soybean and pigeonpea determinacy gene isolation and characterization [25,26,27].
Advances in sequencing technologies have provided cost effective platforms for direct detection of high-quality SNP markers for population genotyping [28,29,30]. Using the sliding-window approach, adjacent SNPs with same genotype in an interval could be combined into bins that demarcate recombination locations across the whole population [31, 32]. Compared with conventional molecular markers (RFLP/SSR or single SNP), bin marker is considered to be the most informative and parsimonious set for a given population . Construction of bin map benefits from this new type of bin marker which relies on automated high-throughput sequencing and genotyping technologies. The bin mapping strategy has been successfully applied to QTL fine mapping of yield associated traits in rice and sorghum [34, 35], root-knot nematode resistance and evolutionary traits in soybean [36, 37], horticultural traits in pepper , tassel and ear architecture, seedling root system architecture and plant architecture in maize [33, 39, 40]. In brief, the bin mapping strategy was demonstrated to be more powerful for QTL detecting than traditional methods.
In this study, the genetic basis of determinate growth habit in sesame was revealed by classical genetic analysis through multiple populations, based on a newly developed high density bin map and SSR markers, the sesame determinacy gene was fine mapped. Development of bin map was a tremendous progress in sesame, the results demonstrated that strategy optimized in this study improved accuracy, resolution and efficiency of gene mapping, the findings provided important foundation for sesame determinacy gene cloning and application in breeding for cultivars suited to mechanized production.
Phenotypic characterization of indeterminate and determinate genotypes
Plants of Zhongzhi No.13 (indeterminate genotype) were all non-branching, their initial flowers appeared at axils of the 4th or 5th pair of leaves, inflorescences of these plants were indefinite, their apical growing point continually developed, with the elongation of rachis, flower buds differentiated successively until to the top (Fig. 1a, b). At the mature stage, number of nodes with capsules varied from 17 to 30 per plant (Fig. 1c), with an average of about 23, and the plant height was normally about 165 cm in average. Comparing with Zhongzhi No.13, phenotypic variations were displayed in Det-4247 (determinate genotype). Plants of Det-4247 were all branching, there were usually 2 primary branches from the main stem, derived with secondary branches. When the 6th or 7th pair of leaves fully developed, the stem apex meristem developed into a floral meristem, forming a terminal flower (Fig. 1d, e), then the main stem terminated, and other flowers successive appeared at the axils of second and third pairs of leaves from top, which demonstrated a typical definite inflorescence. The similar pattern was also observed on their branches. So there were only 2 or 3 nodes with capsules on the main stem and a capsule cluster was formed (Fig. 1f). As both the main stem and branches were determinate, plant height of determinate plants were normally about only 126 cm in average.
Inheritance of growth habit
The F1 plants, which developed from the cross of Zhongzhi No.13 (indeterminate genotype) with Det-4247 (determinate genotype) were all completely indeterminate, indicating the dominance of indeterminacy. Plants of segregated generations (F2, F2:3, BC1 and BC1F2) showed either completely indeterminate or completely determinate phenotype, not any semi-determinate progeny was found. Segregation of indeterminate and determinate plants in all generations revealed a monogenic inheritance pattern (Fig. 2). Growth habit observation, genotype prediction and Chi-squared test revealed that genotypes in F2 generation segregated in a pattern of Dt/Dt: Dt/dt: dt/dt = 1:2:1 (χ2 = 3.8213, P = 0.8520), while genotypes in B1 and B2 generations segregated in Dt/Dt: Dt/dt = 1:1 (χ2 = 2.0882, P = 0.8516) and Dt/dt: dt/dt = 1:1 (χ2 = 1.4257, P = 0.7675) patterns, respectively (Table 1).
Sequencing, genotyping & linkage map developing
Total of 232 F2 individuals were randomly selected for sequencing and genotyping. After library construction and high–throughput sequencing of parents and F2 individuals, total of 17.27 Gb raw data were generated, and a mean of 73.79 Mb high-quality sequence data were produced by each individual. Tags from the two parents were subjected to comparative analysis to detect single nucleotide polymorphism (SNP) survey. After filtering out poor SNPs, total of 13,692 polymorphic SNP markers were detected, then these SNPs were retained for genotyping of the F2 population. According to the 13 anchored pseudo-chromosomes, recombination loci of 232 F2 individuals were identified and bin genotypes of each individual were determined. After linkage analysis, 1184 bins (13,679 SNPs) were mapped onto 13 linkage groups (LGs), while the LG number was equal to the haploid chromosome number of Sesamum indicum L.. This linkage map was 1086.403 cM in length with an average distance of 0.918 cM between adjacent bins (Table 2, Fig. 3). The largest LG was LG04 with 134 bins, and a length of 126.655 cM, while LG09 was the smallest LG, with 72 bins, a length of 52.588 cM, and an average distance of only 0.730 cM between adjacent bins.
Primary mapping of determinacy gene
Primary mapping of determinacy gene was performed based on acquirement of genotypic and phenotypic data of 232 F2 individuals. By composite interval mapping (CIM) method, and scanning in genome wide range, the gene for sesame determinant growth habit was finally located on the up end of LG09, while flanked by Bin1 and Bin2, with a LOD value of 27.4, an additive effect of − 0.8452, and a dominant effect of − 0.1064, which could explain 35.45% of the phenotypic variation (PVE). It ranged from 0 to 1.2 cM of genetic distance on LG09, while the corresponding genome region was about 1979 kb in physical length.
Fine mapping of determinacy gene
In order to sharpen the mapping interval of the sesame determinacy gene, we enlarged the mapping population and employed SSR markers in targeted region for genotyping. Total of 48 pairs of SSR primers were specially developed in the primary mapping genome region, and 19 of them were identified to be polymorphic between parents. These polymorphic SSR markers were subsequently used for genotyping 378 F2 individuals. After linkage analysis and composite interval mapping (CIM), the sesame determinacy gene was finally mapped between SSR markers ZMM5547 and ZMM2366 (Fig. 4), with a LOD value of 105.2, an additive effect of − 0.8956, and a dominant effect of − 0.0637, which could explain 66.24% of the phenotypic variation. The nearest marker ZMM2498 is only 0.022 cM from the gene. The interval of both sides was just 0.2 cM, after sequence alignment, the sesame determinacy gene was located in a 41 kb of genome region (from 53,639 bp to 94,624 bp on chr09).
Inheritance of sesame determinacy gene
Determinate genotypes have been found in many species, it has been proved that determinate growth habit was controlled by a single gene in some cases, but in other studies oligogenic genes were discovered responsible for the transition of different growth habit . Shannon and Meeks-Wagner  reported the first determinate mutant in Arabidopsis, its inflorescence meristem development was affected by TFL1 (TERMINAL FLOWER 1) gene mutation. Dt1 and Dt2, which affected the termination of apical stem growth were found in soybean by Bernard , and Dt1 was proved as an ortholog of Arabidopsis TFL1 gene . The determinacy gene GmTfl1 in soybean was proved to complement the functions of TFL1 in Arabidopsis [26, 41]. The determinate mutant (det) in pea was caused by mutations in a homologue of the Arabidopsis TFL1 gene . In common bean, the gene PvTFL1y was co-segregated with the determinacy locus fin  and then it was also found as a functional homolog of Arabidopsis TFL1 gene . Classical genetic analysis revealed that determinate genotype in this study was typical monogenic recessive. What is more important, materials used in this study possesses only two types of stem growth habits, determinate stem and indeterminate stem, there was not any intermediate type even though in the six derived segregative populations, F2, F2:3, B1, B2, B1F2 and B2F2. That’s the most distinct difference between sesame and other plants which simultaneously generated intermediary semi-determined types, such as soybean (Glycine max) .
Development of bin map is a tremendous progress in sesame
Genetic linkage map is the most important basis of QTL mapping. Since 2009, several genetic maps have been constructed for sesame. Wei et al.  published the first genetic map, which was consisted of only 220 markers, but 30 linkage groups (LGs). Then this map was comparatively saturated with 653 SSR markers , and concentrated to 14 LGs. Employed specific length amplified fragment sequencing (SLAF-seq) strategy, Zhang et al.  constructed a high-density genetic map including 1233 markers distributed on 15 LGs. Wu et al.  developed another high-density genetic map using the restriction-site associated DNA sequencing (RAD-seq), the map included 1230 markers on 14LGs. Wang et al.  constructed the first bin map for sesame, which consisted of 1522 bins (11,924 SNPs) grouped into 13 LGs. Zhang et al.  reported a SNP map comprised of 3041 bins including 30,193 SNPs in 13 LGs. Uncu et al.  published an improved map of 13 LGs encompassed 432 markers (420 SNPs, 12 SSRs). In the present study, a genotyping by sequencing (GBS) approach was employed for high-throughput SNP identification and genotyping, then a high density bin map was constructed, which consisted of 1184 bins (13,679 SNPs), with an average of 0.918 cM between adjacent bins, while the bin marker density was similar to the map density of one bin per 0.98 cM described by Zhang et al. . Furthermore, the number of LGs in our newly developed map is just equal to the haploid chromosome number of Sesamum indicum L., these will also be its obvious advantages in future application.
Strategy optimized in this study improved accuracy, resolution and efficiency of gene mapping
Resolution of QTL mapping depends on the recombination frequency, the coverage of genetic markers, and the population size. Since the lack of reliable markers and the less development of genetic maps in sesame, only few articles reported QTL or gene mapping by linkage analysis. The first QTL analysis of sesame important agronomy traits focused on seed coat color , and 4 QTL were detected based on a linkage map constructed by conventional markers (SSR, AFLP, and RSAMPL), while the QTL intervals ranged from 1.0 cM to 23.4 cM. Wu et al.  detected 30 QTL for 7 grain yield-related traits based on a high-density genetic map constructed by SNP markers, and the QTL regions varied from 0.1 cM to 24.6 cM. Wang et al.  identified 41 QTL for sesame plant height and 9 for seed coat color on their bin map, and the most accurate locus was located on Chr4 in a 199.9 kb space. In our study, after primary mapping on bin map in whole genome scale, we tended to employ SSR markers to densify the targeted region and enhance accuracy for fine mapping, as genotyping by SSR was a mature technology utilized in our lab, which was highly specific, independent of sequencing, repeatable, and low-cost. More importantly, masses of SSR markers had been developed from the whole genome survey in our previously study. Combining bin mapping with targeted region densified by SSR in fine mapping, the candidate block of the sesame determinacy gene was sharped into a genome region of just 41 kb, and only 10 genes was subsequently predicted in this region, which paved the way for obtaining and cloning candidate gene. The fine-accuracy, high-resolution and high-efficiency of mapping result of this study showed the advantages of strategy employed, and also provided valuable technique foundation for further QTL mapping of other key agronomic traits in sesame.
The determinacy gene discovered in this study was a novel dt gene controlling determinate growth habit
The SiDt gene associated with determinate growth habit in sesame has been reported by Zhang et al. , which was discovered from an EMS mutant Yuzhi DS899, in their study, the locus (QDt1) was located to LG8, with an inheritance interval of 18.0 cM–19.2 cM. In contrast, the determinacy gene mapped in this study was discovered from a natural germplasm. In order to verify the identity or dissimilarity between the SiDt gene and the newly discovered determinacy gene here, we performed gene alignment of the SiDt gene sequence in Zhongzhi No.13 reference genome , and the gene SIN_1010554 with 100% identity to the SiDt gene sequence was identified, then the position of SIN_1010554 was further checked, which was located in the middle part of chr09, from 649,613 bp to 651,421 bp, while the determinacy gene mapped here was located in a different genome region, which near the up end of chr09, from 53,639 bp to 94,624 bp. So the results of position compare indicated that they were absolutely disparate genes controlling different determinate genotypes. In addition, positions of all the 7 homologs of SiDt gene were also investigated, and results showed that none of them was within or around the region of our novel dt gene. In summary, the determinacy gene discovered in our study was a novel dt gene controlling determinate growth habit in sesame.
Application prospects of sesame determinacy gene
Genes associated with determinate growth habit have been mapped in several species, such as common bean (Phaseolus vulgaris), pigeonpea (Cajanus spp.), Indian mustard (Brassica juncea), soybean (Glycine max), etc. In common bean, using bulked segregant analysis (BSA) and linkage analysis, 2 markers were identified to be linked to the fin gene (3.3 to 26.9 cM) . In pigeonpea, association mapping showed a significant association (P ≤ 0.01) of determinacy with 19 SNP explaining 8.05–8.58% phenotypic variation , QTL analysis highlighted CcTFL1 as a likely candidate gene, which was located in a genomic region of 24 cM . Kaur and Banga  mapped Indian mustard determinate growth habit gene (Sdt1), which was flanked by 2 SSR markers at distances of 15.9 cM and 14.0 cM. Vicente et al.  mapped the molecular markers of genes Dt1 and Dt2 in soybean, and sat_064 marker associated with Dt2 exhibited a recombination frequency of 19.4%. Nevertheless, most of these QTL/gene from above species were primarily located in a large genome scale, since the QTL regions were not small enough, it was far from candidate gene predication or map-based gene cloning. What was encouraging, based on our fine mapping result, the determinacy gene is cloning and verifying in our laboratory (unpublished study), and will be applied in sesame germplasm innovation or molecular breeding in future through genetically modification or gene pyramiding methods. Ultimately, the newly developed sesame cultivars with determinate growth habit, synchronizing flowering, early maturation and lodging resistance will be popular in the mechanized production, and their application prospects will be promising.
We dissect the genetic basis of determinate growth habit in sesame, constructed a new high-density bin map and mapped a novel determinacy gene. Results of this study demonstrate that bin mapping in conjunction with SSR markers analysis in targeted region was an optimized approach to get fine-accuracy, high-resolution and high-efficiency mapping result in sesame. The findings provided important foundation for sesame determinacy gene cloning and were expected to be applied in breeding for cultivars suited to mechanized production.
Parental genotypes, population development and phenotyping
The female, Zhongzhi No.13, is a widely cultivated sesame variety in China, with indeterminate growth habit. The donor parent, Det-4247, on the other hand, is a special germplasm accession queried from the national mid-term genebank for oil crops, with typical determinate growth habit. F1 plants were developed from the crossing of Zhongzhi No.13 (indeterminate genotype) with Det-4247 (determinate genotype). F2 population derived from the self-crossing of F1, which consisted of 1483 individuals. Zhongzhi No.13 crossed with F1 and generated B1 population (257 individuals), and F1 crossed with Det-4247 then generated B2 population (103 individuals). The self-crossing of F2, B1, and B2 generated three populations of F2:3 (1483 lines), B1F2 (257 lines), and B2F2 (103 lines), respectively. The determinate or indeterminate growth habit of all above materials were investigated during flowering stage and verified in maturation stage, according to IPGRI and NBPGR .
DNA extraction, enzyme digestion and sequencing
Genomic DNA was extracted from young healthy leaves of two parents and each F2 individual, according to the cetyltrimethylammonium bromide (CTAB) method . DNA concentration and quality were estimated with a Qubit Fluorometer (using Quant-iT™ dsDNA HS Assay Kit), and also by electrophoresis in 0.8% agarose gels with a lambda DNA standard. DNA with quality conformance was then digested with the Taq I restriction enzyme (Takara, Dalian, China), and adapters containing a multiplex identifier (MID) were added to the samples . DNA fragments that were 350–600 bp in length were selected by gel electrophoresis from the library samples. Then the libraries were enriched by PCR amplification, quantified on an Agilent 2100 Bioanalyzer (Agilent Technologies, Santa Clara, CA, USA), and finally sequenced on an Illumina HiSeq2000 instrument (San Diego, CA, USA).
SNP calling and genotyping
Raw reads with low quality in which 10% of the nucleotides had a quality value less than Q30 (0.1% sequencing error) were discarded. The clean pair-end reads were further trimmed to the RAD tags with a uniform length of 94 nucleotides. All of the high quality reads were aligned with reference genome of Zhongzhi No.13 (BioProject PRJNA301193 in NCBI) using BWA software . The “mpileup” function in SAMtools software  was employed to detect SNPs between parental lines using reads with mapping quality values greater than or equal to 20. The detected SNPs were used for genotyping each individual in F2 population, only individuals with more than 20,000 SNPs were selected to do the following analysis.
Construction of bin map
The bin map was constructed according to the sliding window approach developed by Huang et al. . The Dt/Dt: Dt/dt: dt/dt segregation ratios of SNP markers were calculated, and their fitness to 1:2:1 were evaluated by the chi-square test, significantly (P < 0.01) distorted markers were discarded. The consecutive genotypic SNPs were scanned with a sliding window size of 15 SNPs and a step size of 1. Based on the recombinant breakpoints, adjacent windows with the same genotype were combined into blocks, which were considered to be bins [33, 48]. The bin markers were analyzed using JoinMap 4 software  with a logarithm of minimum odds (LOD) of 4.0, the Kosambi mapping function  was used to transform the recombination frequency into map distance in centiMorgans (cM), and then the bin map was constructed.
Primary mapping and fine mapping of determinacy gene
Based on the bin map, genotypes of bin markers, and growth habit phenotypes of F2 individuals, QTL mapping was performed using composite interval mapping (CIM) method , employed WinQTLCart 2.5 software (http://statgen.ncsu.edu/qtlcart/WQTLCart.htm). The likelihood ratio statistic was computed for each bin. The LOD thresholds were obtained based on permutation test (1000 permutations, P = 0.05). After primary mapping, the major QTL was detected, and the QTL interval and corresponding genome region were uncovered. In order to mapping the determinacy gene within a more accurate region, SSR markers were selected specially from the primary mapping genome region, based on the 23,438 SSR markers previously developed from the whole genome survey [58, 59], selected SSR markers were subsequently screened for polymorphism between parents, and then used to genotyping a larger F2 population for fine mapping of determinacy gene. The corresponding physical distance of the mapping interval was obtained by aligning with the Zhongzhi No.13 reference genome (BioProject PRJNA301193 in NCBI).
Bulked Segregant Analysis
Composite Interval Mapping
Genotyping by Sequencing
Logarithm of minimum odds
Restriction-site Associated DNA sequencing
Specific Length Amplified Fragment sequencing
Single Nucleotide Polymorphism
Ashri A. Increased genetic variability for sesame improvement by hybridization and induced mutations. In: Sesame: status and improvement (Ed.: Ashri A.). FAO Plant Production and Protection Paper. Rome: FAO; 1981. pp 141-5.
Çagirgan Mİ. Selection and morphological characterization of induced determinate mutants in sesame. F Crop Res. 2006;96:19–24.
Uzun B, lhan ÇM. Comparison of determinate and indeterminate lines of sesame for agronomic traits. F Crop Res. 2006;96:13–8.
Çagirgan Mİ, Özerden S, Özbas MO. Agronomic trait assessment and selection for number of capsules in determinate × indeterminate crosses of sesame. Turkish. J Agric For. 2009;33:231–41.
Uzun B, Ülger S, Çagirgan ML. Comparison of determinate and indeterminate types of sesame for oil content and fatty acid composition. Turkish. J Agric For. 2002;26:269–74.
Uzun B, Çagirgan MI. Identification of molecular markers linked to determinate growth habit in sesame. Euphytica. 2009;166:379–84.
Bernard RL. Two genes affecting stem termination in soybeans. Crop Sci. 1972;12:235–9.
Shannon S, Meeks-Wagner DR. A mutation in the Arabidopsis TFL1 gene affects inflorescence meristem development. Plant Cell. 1991;3:877–92.
Koinange EMK, Singh SP, Gepts P. Genetic control of the domestication syndrome in common bean. Crop Sci. 1996;36:1037–45.
Pnueli L, Carmel-Goren L, Hareven D, Gutfinger T, Alvarez J, Ganal M, Zamir D, Lifschitz E. The SELF-PRUNING gene of tomato regulates vegetative to reproductive switching of sympodial meristems and is the ortholog of CEN and TFL1. Development. 1998;125:1979–89.
Laudencia-chingcuanco D, Hake S. The indeterminate floral apex1 gene regulates meristem determinacy and identity in the maize inflorescence. Development. 2002;129:2629–38.
Avila CM, Atienza SG, Moreno MT, Torres AM. Development of a new diagnostic marker for growth habit selection in faba bean (Vicia faba L.) breeding. Theor Appl Genet. 2007;115:1075–82.
Pañeda A, Rodríguez-Suárez C, Campa A, Ferreira JJ, Giraldez R. Molecular markers linked to the fin gene controlling determinate growth habit in common bean. Euphytica. 2008;162:241–8.
Hegde VS. Morphology and genetics of a new found determinate genotype in chickpea. Euphytica. 2011;182:35–42.
Mir RR, Saxena RK, Saxena K, Upadhyaya HD, Kilian A, Cook DR, Varshney RK. Whole-genome scanning for mapping determinacy in Pigeonpea (Cajanus spp.). Plant Breed. 2013;132:472–8.
Dhanasekar P, Reddy KS. A novel mutation in TFL1 homolog affecting determinacy in cowpea (Vigna unguiculata). Mol Gen Genomics. 2015;290:55–65.
Blair MW, Iriarte G, Beebe S. QTL analysis of yield traits in an advanced backcross population derived from a cultivated Andean × wild common bean (Phaseolus vulgaris L.) cross. Theor Appl Genet. 2006;112:1149–63.
Campos T, Oblessuc PR, Sforça DA, Cardoso JMK, Baroni RM, de Sousa ACB, Carbonell SAM, Chioratto AF, Garcia AAF, Rubiano LB, de Souza AP. Inheritance of growth habit detected by genetic linkage analysis using microsatellites in the common bean (Phaseolus vulgaris L.). Mol Breed. 2011;27:549–60.
Fazio G, Staub JE, Stevens MR. Genetic mapping and QTL analysis of horticultural traits in cucumber (Cucumis sativus L.) using recombinant inbred lines. Theor Appl Genet. 2003;107:864–74.
Kaur H, Banga SS. Discovery and mapping of Brassica juncea Sdt 1 gene associated with determinate plant growth habit. Theor Appl Genet. 2015;128:235–45.
Liu B, Fujita T, Yan ZH, Sakamoto S, Xu D, Abe J. QTL mapping of domestication-related traits in soybean (Glycine max). Ann Bot. 2007;100:1027–38.
Vladutu C, McLaughlin J, Phillips RL. Fine mapping and characterization of linked quantitative trait loci involved in the transition of the maize apical meristem from vegetative to generative structures. Genetics. 1999;153:993–1007.
Vicente D, Schuster I, Lazzari F, Paranzini JPD, Oliveira MAR. de, Prete CEC. Mapping and validation of molecular markers of genes Dt1 and Dt2 to determine the type of stem growth in soybean. Acta Sci Agron. 2016;38:61–8.
Park SO, Coyne DP, Bokosi JM, Steadman JR. Molecular markers linked to genes for specific rust resistance and indeterminate growth habit in common bean. Euphytica. 1999;105:133–41.
Mir RR, Kudapa H, Srikanth S, Saxena RK, Sharma A, Azam S, Saxena K, Varma Penmetsa R, Varshney RK. Candidate gene analysis for determinacy in pigeonpea (Cajanus spp.). Theor Appl Genet. 2014;127:2663–78.
Liu B, Watanabe S, Uchiyama T, Kong F, Kanazawa A, Xia Z, Nagamatsu A, Arai M, Yamada T, Kitamura K, Masuta C, Harada K, Abe J. The soybean stem growth habit gene Dt1 is an ortholog of Arabidopsis TERMINAL FLOWER1. Plant Physiol. 2010;153:198–210.
Kwak M, Velasco D, Gepts P. Mapping homologous sequences for determinacy and photoperiod sensitivity in common bean (Phaseolus vulgaris). J Hered. 2008;99:283–91.
Schuster SC. Next-generation sequencing transforms today’s biology. Nat Methods. 2008;5:16–8.
Mardis ER. The impact of next-generation sequencing technology on genetics. Trends Genet. 2008;24:133–41.
Varshney RK, Nayak SN, May GD, Jackson SA. Next-generation sequencing technologies and their implications for crop genetics and breeding. Trends Biotechnol. 2009;27:522–30.
Huang X, Feng Q, Qian Q, Zhao Q, Wang L, Wang A, Guan J, Fan D, Weng Q, Huang T, Dong G, Sang T, Han B. High-throughput genotyping by whole-genome resequencing. Genome Res. 2009;19:1068–76.
Yu H, Xie W, Wang J, Xing Y, Xu C, Li X, Xiao J, Zhang Q. Gains in QTL detection using an ultra-high density SNP map based on population sequencing relative to traditional RFLP/SSR markers. PLoS One. 2011;6:e17595.
Chen Z, Wang B, Dong X, Liu H, Ren L, Chen J, Hauck A, Song W, Lai J. An ultra-high density bin-map for rapid QTL mapping for tassel and ear architecture in a large F2 maize population. BMC Genomics. 2014;15:433.
Zou G, Zhai G, Feng Q, Yan S, Wang A, Zhao Q, Shao J, Zhang Z, Zou J, Han B, Tao Y. Identification of QTLs for eight agronomically important traits using an ultra-high-density map based on SNPs generated from high-throughput sequencing in sorghum under contrasting photoperiods. J Exp Bot. 2012;63:5451–62.
Gao Z, Zhao S, He W, Guo L, Peng Y, Wang J, Guo X, Zhang X, Rao Y, Zhang C, Dong G, Zheng F, Lu C, Hu J, Zhou Q, Liu H, Wu H, Xu J, Ni P, Zeng D, Liu D, Tian P, Gong L, Ye C, Zhang G, Wang J, Tian F, Xue D, Liao Y, Zhu L, Chen M, Li J, Cheng S, Zhang G, Wang J, Qian Q. Dissecting yield-associated loci in super hybrid rice by resequencing recombinant inbred lines and improving parental genome sequences. Proc Natl Acad Sci. 2013;110:14492–7.
Wang W, Liu M, Wang Y, Li X, Cheng S, Shu L, Yu Z, Kong J, Zhao T, Gai J. Characterizing two inter-specific bin maps for the exploration of the QTLs/genes that confer three soybean evolutionary traits. Front Plant Sci. 2016;7:1–16.
Xu X, Zeng L, Tao Y, Vuong T, Wan J, Boerma R, Noe J, Li Z, Finnerty S, Pathan SM, Shannon JG, Nguyen HT. Pinpointing genes underlying the quantitative trait loci for root-knot nematode resistance in palaeopolyploid soybean by whole genome resequencing. Proc Natl Acad Sci. 2013;110:13469–74.
Han K, Jeong HJ, Yang HB, Kang SM, Kwon JK, Kim S, Choi D, Kang BC. An ultra-high-density bin map facilitates high-throughput QTL mapping of horticultural traits in pepper (Capsicum annuum). DNA Res. 2016;23:81–91.
Song W, Wang B, Hauck AL, Dong X, Li J, Lai J. Genetic dissection of maize seedling root system architecture traits using an ultra-high density bin-map and a recombinant inbred line population. J Integr Plant Biol. 2016;58:266–79.
Zhou Z, Zhang C, Zhou Y, Hao Z, Wang Z, Zeng X, Di H, Li M, Zhang D, Yong H, Zhang S, Weng J, Li X. Genetic dissection of maize plant architecture with an ultra-high density bin map based on recombinant inbred lines. BMC Genomics. 2016;7:178.
Tian Z, Wang X, Lee R, Li Y, Specht JE, Nelson RL, McClean PE, Qiu L, Ma J. Artificial selection for determinate growth habit in soybean. Proc Natl Acad Sci. 2010;107:8563–8.
Foucher F, Morin J, Courtiade J, Cadioux S, Ellis N, Banfield MJ, Rameau C. Determinate and late flowering are two terminal flower1/centro-radialis homologs that control two distinct phases of flowering initiation and development in pea. Plant Cell. 2003;15:2742–54.
Repinski SL, Kwak M, Gepts P. The common bean growth habit gene PvTFL1y is a functional homolog of Arabidopsis TFL1. Theor Appl Genet. 2012;124:1539–47.
Wei L, Zhang H, Zheng Y, Miao H. A genetic linkage map construction for sesame (Sesamum indicum L .). Genes Genomics. 2009;31:199–208.
Zhang H, Miao H, Wei L, Li C, Zhao R, Wang C. Genetic analysis and QTL mapping of seed coat color in sesame (Sesamum indicum L.). PLoS One. 2013;8:e63898.
Zhang Y, Wang L, Xin H, Li D, Ma C, Ding X, Hong W, Zhang X. Construction of a high-density genetic map for sesame based on large scale marker development by specific length amplified fragment (SLAF) sequencing. BMC Plant Biol. 2013;13:141.
Wu K, Liu H, Yang M, Tao Y, Ma H, Wu W, Zuo Y, Zhao Y. High-density genetic map construction and QTLs analysis of grain yield-related traits in sesame (Sesamum indicum L.) based on RAD-Seq techonology. BMC Plant Biol. 2014;14:274.
Wang L, Xia Q, Zhang Y, Zhu X, Zhu X, Li D, Ni X, Gao Y, Xiang H, Wei X, Yu J, Quan Z, Zhang X. Updated sesame genome assembly and fine mapping of plant height and seed coat color QTLs using a new high-density genetic map. BMC Genomics. 2016;17:31.
Zhang H, Miao H, Li C, Wei L, Duan Y, Ma Q, Kong J, Xu F, Chang S. Ultra-dense SNP genetic map construction and identification of SiDt gene controlling the determinate growth habit in Sesamum indicum L. Sci Rep. 2016;6:31556.
Uncu AO, Frary A, Karlovsky P, Doganlar S. High-throughput single nucleotide polymorphism (SNP) identification and mapping in the sesame (Sesamum indicum L.) genome with genotyping by sequencing (GBS) analysis. Mol Breed. 2016;36:173.
IPGRI and NBPGR. Descriptors for Sesame (Sesamum spp.). International Plant Genetic Resources Institute, Rome, Italy; and National Bureau of plant genetic resources, New Delhi, India. 2004.
Doyle JJ, Doyle JL. A rapid DNA isolation procedure for small quantities of fresh leaf tissue. Phytochem Bull. 1987;19:11–5.
Li H, Durbin R. Fast and accurate short read alignment with burrows-wheeler transform. Bioinformatics. 2009;25:1754–60.
Li H, Handsaker B, Wysoker A, Fennell T, Ruan J, Homer N, Marth G, Abecasis G, Durbin R. The sequence alignment/map format and SAMtools. Bioinformatics. 2009;25:2078–9.
VAN Ooijen JW. Multipoint maximum likelihood mapping in a full-sib family of an outbreeding species. Genet Res (Camb). 2011;93:343–9.
Kosambi DD. The estimation of map distances from recombination values. Ann Eugenics. 1944;12:172–5.
Zeng Z. Precision mapping of quantitative trait loci. Genetics. 1994;136:1457–68.
Wang L, Zhang Y, Qi X, Gao Y, Zhang X. Development and characterization of 59 polymorphic cDNA-SSR markers for the edible oil crop Sesamum indicum (pedaliaceae). Am J Bot. 2012;99:394–8.
Wei X, Wang L, Zhang Y, Qi X, Wang X, Ding X, Zhang J, Zhang X. Development of simple sequence repeat (SSR) markers of sesame (Sesamum indicum) from a genome survey. Molecules. 2014;19:5150–62.
We thank the national mid-term genebank for oil crops for providing the parental materials used in this study.
This work was financially supported by the Project of Crop Germplasm Resources Protection (2017NWB033), the National Infrastructure for Crop Germplasm Resources (NICGR2017–014), the National Science-technology Support Plan Project (2013BAD01B03–08), and the Agricultural Science and Technology Innovation Project of Chinese Academy of Agricultural Sciences (CAAS-ASTIP-2013-OCRI). The foundations had no influence on the research.
Availability of data and materials
All data analyzed during this study are included in this published article, the other raw data generated in this study are available from the corresponding author on reasonable request.
Ethics approval and consent to participate
All the plant materials used in this research were provided by the national mid-term genebank for oil crops. The field experiment was conducted under local legislation and permissions.
The authors declare that they have no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Zhang, Y., Wang, L., Gao, Y. et al. Genetic dissection and fine mapping of a novel dt gene associated with determinate growth habit in sesame. BMC Genet 19, 38 (2018) doi:10.1186/s12863-018-0614-y
- Sesamum indicum L.
- Genetic basis
- Bin map
- Fine mapping